About Us
More power and less weight will drop your quarter mile time, reduce your lap time, and increase your fuel economy. Titanium Dynamic’s line of light weight exhaust components will increase your ride’s performance in the category that matters to you. And, it might just be that last factor that gets you first place at the show.
TITANIUM IS THE IDEAL MATERIAL FOR YOUR EXHAUST.
HERE IS WHY:
Weight – Less weight will improve your acceleration, braking, handling, and fuel economy. Titanium is naturally 44% lighter than 304 stainless, but the reduction in weight means less material is required to support the entire exhaust system. This means the wall thickness of Titanium tube can be thinner. Compared to 3” 16ga 304SS tube, Titanium tube is 63% lighter.
Engine Performance – More flow means more power. Large diameter tubing and “straight through” mufflers increase flow, so they are one of the foundational performance modifications to increase horsepower. That is the reason we only offer mandrel bent products. “Pie section” bends are an impressive feat of welding ability, but they compromise flow and can drive up the cost of an exhaust system.
Highly corrosion resistant – Titanium performs well even in the saltiest road conditions. Titanium forms an oxidation layer similar to aluminum. Once this layer has formed, it naturally protects the rest of the titanium from the elements.
Strength – Titanium has a higher specific strength (strength vs weight) than aluminum and stainless steel. It performs great in hot environments like your exhaust system. It will hold its strength up to 800°F. If you drive your car on the street, your exhaust pipe is almost certainly below 800°F.
WHY DOESN'T EVERYONE DO IT?
Bending the tube is difficult. Some companies make “pie section” bends because mandrel bends take special considerations. Don’t worry, that’s our job.
Although Titanium is abundant in the earth, it is expensive to process. Titanium cannot be refined from the ore in the ground as easily as iron can. The additional refining steps are responsible for the raw material cost. We maintain low costs by eliminating unnecessary labor hours to our products such as “pie section” bends.
CAN YOU WORK WITH TITANIUM YOURSELF?
Fabrication and welding titanium takes special considerations, but we will help! Please Contact us or one of our Many Dealers
Any work you do with titanium is at your own risk! We take safety very seriously and will do everything we can to educate you on how to work with titanium safely. Sharp edges, hot work, and dust explosions are serious concerns and must be handled appropriately. Titanium Dynamics is not liable for any property damage or injury.
Prop 65 WARNING. Some products may contain chemicals known by the state of California to cause cancer or other health issues for more information please vist www.P65Warnings.ca.gov
